- Camera Recognition: All kinds of compensations and marks which occur in everyday practice can be tracked and managed with SummaFlex Pro.
- Tangential Module: The powerful Tangential Module offers a vertical force of 10kg and a horizontal force of 20 kg and corresponds to a wife range of matching tools.
- Drag Module: The Drag Module makes notations with pens or kiss-cuts a wide range of material with a pressure of 600 grams of downforce using a drag knife.
- Rotary Module: The Rotary Module on the Summa F Series is driven by an electronic motor and is capable of handling all kinds of thin materials with a main focus on textiles.
- ADC: The Automated Depth Control (ADC) simplifies tool, knife or bit changes significantly; it measures the tip of the knife or bit accurately and sets the down position of the tool to the level of the table.
- Media Advance Clamps: Pneumatically driven media advance clamps holds the material down while pullling it forward in order to work continuously in panels or multiple jobs.
- Vacuum Pump: The Vacuum Pump with sound absorber holds the material in place during the job while the Selector adjusts the vacuum automatically to match the working area.
|Cutting Area||63 in. (160 cm) wide x 47.2 in. (120 cm) long up to 164 ft. (50 m) long in multi panel|
|Media Width||Up to 65 in. (165 cm)|
|Multi Panel*||1968 in. (5000 cm) *Media clamps and roll-feed and/or conveyor belt system are required|
|Repeatability||Within /- 0.05 mm on plots|
|Accuracy||0.05 % of move or 0.05 mm, whichever is greater|
|Speed||Up to 39.4 in./sec (1000 mm/sec)|
|Acceleration||Up to 1 G|
|Clearance*||1.9 in. (5 cm) *Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting matt or conveyor belt|
|Maximum Allowed Forces||Vertical: 200 Newton, Horizontal: 200 Newton|
|Maximum Table Load||10.2 lb/ft2 (50 kg/m2)|
|Power Requirements||3 Phase 208V N or 3 Phase 230V or 3 Phase 400V N|
|Dimensions||92.5 x 76.3 x 43.3 in. (235 x 194 x 110 cm) – without roll support|
|Weight||1100 lbs (500 kg)|
|Operating Temperature||59˚ to 95˚F (15˚ to 35˚C)|
|Standard Accessories||Drag Knife Module, Conveyor System, Roll-Feed System, Safety Beam System, Pneumatic Pack, wireless controller w/ charger, standard 36˚ blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), CD w/ manuals and drivers|
|Optional Accessories||Tangential Knife Module, F Series Router System, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, SummaFlex™, SummaFlex Pro™ production software|